VOLVO
ECM-P301900 - Electrical Coolant Pump - Low Fluid Level. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Kun motor: B4204T11
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11
Hva betyr feilkoden?
The code concerns the electric coolant pump, which has an internal check that the pump does not run dry. It is set when the engine control module (ECM) receives a fault signal from the pump, and the causes are a low coolant level or air in the cooling system.
Mulige årsaker
- Low coolant level
- Air in the cooling system
Hva du kan gjøre
- 1Read the code with a diagnostic tool and check whether it is active or only stored
- 2Check the coolant level in the expansion tank when the engine is cold
- 3Look for signs of coolant leaking under the car and at the hoses, since a low level has a cause
- 4Top up with the right type of coolant if the level is too low, but do not open the cooling system while the engine is hot
- 5Have a workshop bleed the cooling system if air has got into it
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The pump motor overheats
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.