Hva betyr feilkode ECM-U000188?

Diagnose og feilkodedefinisjon for ECM-U000188 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo S80 (2007–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-U000188 - High Speed CAN Communication Bus. Bus Signal / Message Failures. Bus off

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

3 modeller

S60 (2011–), S80 (2007–), V70 (2008–)

Vis modeller per årsmodell og motor (9)

Hva betyr feilkoden?

The engine control module (ECM) has switched itself off on the high speed CAN network, which is called bus-off. The code is set when the module notices that CAN communication is disturbed, either by another control module or by its own messages.

Mulige årsaker

Short circuit between the CAN wires
Open circuit in one of the CAN wires
Internal fault in another control module on the same part of the CAN network
Internal fault in the ECM

Hva du kan gjøre

1Read the codes in other control modules, since another module disturbing the network can set its own codes
2Use a multimeter to check that the CAN wires have no break and no short to each other
3If you have a diagnostic tool: switch the ignition off and on and read whether the code comes back
4Have a workshop determine whether the engine control module or another module on the CAN network is at fault

Symptomer du kan merke4

Cruise control does not work at all
The engine bucks on acceleration
The engine shudders heavily after engine braking
Uneven idling

Hva feilen kan påvirke3

The engine control module switches itself off on the network (bus-off)
The engine control module stays off until the voltage supply has been broken
When the voltage is switched on again, the engine control module makes new attempts to communicate

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.