Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-U002187
    VOLVO

    ECM-U002187 - Brake Pedal Switch Circuit. Bus Signal / Message Failures. Missing message

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    3 modeller

    S60 (2011–), S80 (2007–), V70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2012Kun motor: B5254T5
    • Volvo S80 (2007–)2007–2008Kun motor: B5254T6
    • Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Kun motor: B5254T10
    • Volvo V70 (2008–)2008Kun motor: B5254T6
    • Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Kun motor: B5254T10

    Hva betyr feilkoden?

    The code is set when the engine control module does not receive any message from the brake control module (BCM), that is when the communication between them stops. The cruise control then cannot be engaged.

    Mulige årsaker

    • Open circuit in the communication cable
    • Communication cable shorted to ground
    • Communication cable shorted to voltage
    • Contact resistance or oxidation in the connections
    • Open circuit in the connections
    • Short circuit in the connections

    Hva du kan gjøre

    1. 1Read the code with a diagnostic tool and see whether it is active or only stored
    2. 2The brake system is safety critical, so have a workshop check the brake control module if the fault remains
    3. 3Gently pull on the connectors to the brake control module and the engine control module and see whether the code or the cruise control is affected
    4. 4Use a multimeter to check that the communication cable between the brake control module and the engine control module has no break and no contact with ground or voltage
    5. 5After the battery has been disconnected, press the brake pedal for a few seconds with the engine running so that cruise control comes back

    Symptomer du kan merke1

    • Cruise control does not engage

    Hva feilen kan påvirke1

    • Cruise control is disengaged for as long as the fault is active

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.