VOLVO
ECM-U010181 - Lost communication with Transmission Control Module (TCM). Bus Signal / Message Failures. Invalid serial data received
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The ECM gets a torque request signal from the transmission control module (TCM). Even though the code is named invalid data, it applies when the signal is missing, and the code can be a follow-on fault if the transmission control module has a code of its own.
Mulige årsaker
- Damaged transmission control module (TCM)
Hva du kan gjøre
- 1Read the codes in the engine control module; if there are other CAN-related codes, fault-trace those first
- 2Read the codes in the transmission control module (TCM), since a code there may be the root cause
- 3If you have a diagnostic tool: clear the code, drive for a while and read whether it is set again
- 4Have a workshop check the transmission control module if the code returns, since it may be damaged
- 5Tell the workshop if any control module has recently been replaced, since its software then has to be reloaded
Symptomer du kan merke1
- The automatic gearbox shifts hard or jerkily, sometimes or all the time
Hva feilen kan påvirke1
- Torque requests from the transmission control module (TCM) are no longer used by the ECM
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.