VOLVO
ECM-U010186 - Lost communication with Transmission Control Module (TCM). Bus Signal / Message Failures. Signal invalid
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The ECM gets a torque request signal from the transmission control module (TCM). The code is set when the quality of that signal is too low, and a damaged TCM is the cause given.
Mulige årsaker
- Damaged transmission control module (TCM)
Hva du kan gjøre
- 1Read the code with a diagnostic tool and check whether it is active or only stored
- 2Fault-trace the transmission control module (TCM) first, since it is the module sending the signal
- 3If you have a diagnostic tool: read the codes in the engine control module and deal with any other CAN-related codes first
- 4Have a workshop check the transmission control module, since it is the cause given for the fault
Symptomer du kan merke1
- The automatic gearbox shifts hard or jerkily, sometimes or all the time
Hva feilen kan påvirke1
- Torque requests from the transmission control module (TCM) are no longer used by the ECM
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.