VOLVO
ECM-U010387 - Lost Communication With Gear Shift Control Module A. Bus Signal / Message Failures. Missing message
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
Hva betyr feilkoden?
The ECM watches TCM signals and also waits for the gear selector (GSM) signal. The code is set when the signal from the gear selector is missing, and the cause may be an open circuit or a short circuit in the signal wire.
Mulige årsaker
- Open circuit or short circuit in the signal wire
Hva du kan gjøre
- 1Read the code with a diagnostic tool and see whether it is active or only stored
- 2Check that the connectors on the signal wire to the gear selector are secure and free from oxidation
- 3Use a multimeter to check that the signal wire to the gear selector has no break or short to ground or voltage
- 4Have a workshop check the gear selector and the signal wire if the fault remains
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.