VOLVO
ECM-U010687 - Lost Communication With Glow Plug Control Module 1. Bus Signal / Message Failures. Missing message
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The code concerns the communication with glow plug control module 1, which controls the glow plugs when starting. The code is set when a message from the glow plug control module is missing, and it is checked after the engine has run for a while.
Mulige årsaker
- Damaged cables or connectors
- Damaged glow plug control unit
Hva du kan gjøre
- 1Read the code with a diagnostic tool and see whether it is active or only stored
- 2Check that the connectors to the glow plug control module and to the engine control module are secure and free from oxidation
- 3Look for chafed wiring to the glow plug control module and use a multimeter to check that it has no break
- 4If you have a diagnostic tool: activate the glow plugs and see or listen whether the module responds
- 5Have a workshop check the glow plug control module if the fault remains
Symptomer du kan merke2
- The engine is hard to start and cranks slowly, sometimes or all the time
- The engine is hard to start and cranks slowly on a cold start
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.