VOLVO
ECM-U014082 - Lost communication with Central Electronic Module (CEM). Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
14 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (37)
- Volvo C30 (2007–2013)2011–2013Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Kun motor: B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012Kun motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4162T, D4204T5
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, D5204T2, D5244T10
- Volvo S80 (2007–)2012Kun motor: B6304T4, B6324S4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Alle motorer unntatt: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2014Kun motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Kun motor: B6304T4, B6324S4, B6324S5, D5204T3, D5244T15
- Volvo V40 (2013–)2013Alle motorer unntatt: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014Alle motorer unntatt: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle motorer unntatt: B4164T, D4162T
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, B4204T11, D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Kun motor: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Kun motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4162T, D4204T5
- Volvo V60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T9, D4162T, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2011Kun motor: B6304T4, B6324S5, D5204T2, D5244T10
- Volvo V70 (2008–)2012Kun motor: B6304T4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Alle motorer unntatt: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2014Alle motorer unntatt: B4164T, B4164T2, B4204T11, B4204T7, D4162T, D4204T5
- Volvo V70 (2008–)2015Alle motorer unntatt: B4164T, B4164T2, B4204T11, D4162T, D4204T5
- Volvo XC60 (2009–)2011–2012Alle motorer unntatt: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7
- Volvo XC60 (2009–)2014–2015Alle motorer unntatt: B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4204T5
- Volvo XC70 (2008–)2011–2013
- Volvo XC70 (2008–)2014–2015Alle motorer unntatt: B4204T11, D4204T5
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The engine control module (ECM) monitors communication with the central electronics control module (CEM). Although the code names an incorrect or missing sequence counter, it is set when communication with the CEM stops. The cruise control is then switched off.
Mulige årsaker
- Break or short circuit on the CAN wires
- The communication wire is shorted to ground or supply voltage
- Contact resistance or oxidation in the connections
- Short circuit in the connections
- The engine control module is not intended for this car, for example a used module with different software or hardware
- A common fault on the CAN network, if several control modules have communication faults
Hva du kan gjøre
- 1Read the codes in the central electronics control module and fix them before going further
- 2Check the fuses and that the central electronics control module receives voltage
- 3Check the connectors on the CAN wires for contact resistance, oxidation and loose contacts
- 4Look for chafed wiring and use a multimeter to check that the CAN wires have no break or short to ground or supply voltage
- 5If the engine control module has been replaced: check that it is intended for this exact car
- 6If the fault returns: have a workshop with diagnostic equipment check the communication. Do not replace the central electronics control module unless a workshop has shown it is faulty
Symptomer du kan merke1
- The cruise control does not engage
Hva feilen kan påvirke1
- The cruise control does not work while the fault remains
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.