Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-U014100
    VOLVO

    ECM-U014100 - Lost Communication With Central electronic module "A". General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    7 modeller

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (13)
    • Volvo S60 (2011–)2011–2014Kun motor: B6304T4
    • Volvo S60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
    • Volvo S80 (2007–)2007Kun motor: B6324S, B8444S
    • Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, B8444S
    • Volvo V60 (2011–)2011–2014Kun motor: B6304T4
    • Volvo V60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
    • Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
    • Volvo XC60 (2009–)2009–2010Kun motor: B6304T2
    • Volvo XC60 (2009–)2011–2015Kun motor: B6304T4
    • Volvo XC70 (2008–)2008Kun motor: B6324S
    • Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
    • Volvo XC90 (2003–)2005–2006, 2011Kun motor: B8444S
    • Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S

    Hva betyr feilkoden?

    The engine control module (ECM) registers a communication fault between itself and the central electronics control module (CEM) and stores the code in the engine control module. This code has no separate troubleshooting, so start with the codes in the CEM and in other control modules on the CAN network.

    Mulige årsaker

    • Break in one of the CAN wires
    • Short circuit between the CAN wires
    • Internal fault in another control module on the same part of the CAN network

    Hva du kan gjøre

    1. 1Read the codes in the central electronics control module and other affected control modules and fix them first. Then clear this code
    2. 2Check that the fuses are intact
    3. 3Check the connectors on the CAN network for oxidation and loose contacts
    4. 4Look for chafed wires and use a multimeter to check that the CAN wires have no break or short circuit to each other
    5. 5If the fault returns: have a workshop with diagnostic equipment check the CAN network and the control modules on it

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.