VOLVO
ECM-U040100 - Invalid Data Received From Engine control module. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (17)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
Hva betyr feilkoden?
The engine control module (ECM) is configured using the vehicle configuration from the central electronics control module (CEM). The code is set when the ECM detects an internal fault, or when a parameter sent by the CEM is faulty. Although the code is titled invalid data received from the engine control module, it concerns the ECM's own faults and the parameters it receives.
Mulige årsaker
- A module or function was removed or fitted without the vehicle configuration being correctly updated
- Faulty engine control module
Hva du kan gjøre
- 1Check whether any control module or function has recently been changed, removed or added. If so, the car's configuration may need updating by a workshop
- 2Check that the fuses are intact and that the battery has good voltage
- 3If you have a diagnostic tool: read the status indicators and freeze-frame values to see whether the fault is present now and when it occurred
- 4If the fault returns: have a workshop with diagnostic equipment check the engine control module and its configuration
Symptomer du kan merke2
- The engine does not start
- Text message and warning symbol in the display
Hva feilen kan påvirke1
- A default value is used for the faulty parameter
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.