VOLVO
ECM-U040281 - Invalid Data Received from TCM. Bus Signal / Message Failures. Invalid serial data received
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (24)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012Kun motor: B4164T2, B4204T7
- Volvo S60 (2011–)2013–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012Kun motor: B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2013–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012Kun motor: B4164T2, B4204T7
- Volvo V60 (2011–)2013–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012Kun motor: B4164T2, B4204T7
- Volvo V70 (2008–)2013–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) receives the torque request signal from the transmission control module (TCM). The code is set when the message from the TCM is judged to be of too poor quality. Although the code is titled invalid data received, it concerns the quality of the message.
Mulige årsaker
- Fault on the CAN network
- Damaged transmission control module (TCM)
Hva du kan gjøre
- 1Look for other CAN-related fault codes in the engine control module and fix them first, as they may share the cause
- 2Check whether the transmission control module has its own codes. If it does, troubleshoot there, as that usually leads to the root cause
- 3Check the CAN connectors for loose or corroded contacts and look for chafed wiring
- 4If the fault returns: have a workshop with diagnostic equipment check the transmission control module and the CAN network
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.