VOLVO
ECM-U041500 - Invalid Data Received From Anti-Lock Brake System Control Module. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (11)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2015Kun motor: D4162T
- Volvo S80 (2007–)2008–2010Kun motor: D4204T
- Volvo S80 (2007–)2012–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2008–2010Kun motor: D4204T
- Volvo V70 (2008–)2012–2015Kun motor: D4162T
Hva betyr feilkoden?
The engine control module (ECM) receives messages from the brake control module (BCM) over CAN. The code is set when the ECM detects a faulty or invalid message from the BCM. Although the code is titled invalid data from the anti-lock brake system control module, it concerns the messages from the brake control module.
Mulige årsaker
- Fault in the brake control module (BCM), which should be checked first
- Fault on the CAN network
Hva du kan gjøre
- 1Read the codes in the brake control module and fix them first
- 2Check the CAN connectors between the engine control module and the brake control module for loose or corroded contacts
- 3Use a multimeter to check that the CAN wires have no break or short to ground or supply voltage
- 4Do not work on the braking system yourself. If the fault returns: have a workshop with diagnostic equipment check the brake control module and the CAN network
Symptomer du kan merke1
- The cruise control does not engage
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.