ECM-U041863 - Invalid Data Received From Brake System Control Module. Algorithm Based Failures. Circuit / component protection time-out
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (23)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2010Kun motor: B6324S, B6324S2
- Volvo S80 (2007–)2011–2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: B6324S, B6324S2
- Volvo V70 (2008–)2011–2014Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2015Kun motor: B6304T4
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2014Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Kun motor: B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2010Kun motor: B6324S, B6324S2
- Volvo XC70 (2008–)2011–2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module (ECM) has received an invalid request for extra wheel torque from the brake control module (BCM). The BCM asks for more torque when the driven wheels slip, and the ECM checks the conditions before torque is raised. Although the fault is named a circuit or component protection time-out, the code is set when the request for extra wheel torque is outside its permitted duration. The code is stored after the BCM has stored its own fault and cannot be erased until that fault is remedied.
Mulige årsaker
- The fault is in the brake control module (BCM)
Hva du kan gjøre
- 1Read the fault codes in the brake control module (BCM) and remedy them first. The code in the engine control module cannot be erased until the BCM fault is remedied.
- 2Erase the fault codes once the BCM fault is remedied, then check on a test drive whether the code returns.
- 3Do not work on the brake system yourself. Have a workshop check the BCM if the code returns.
Symptomer du kan merke1
- Warning symbol and message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.