VOLVO
ECM-U100368 - System Timer. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4204T7
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4204T7
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4204T7
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) should receive a real-time clock signal from the central electronic module (CEM). The code is set if the signal has not reached the ECM some time after the ignition is switched on. It is an event-controlled code that only gives information and does not mean that the ECM is faulty. It does not need to be erased, as it disappears once the conditions no longer apply.
Mulige årsaker
- Interference in the CAN network
- Damaged central electronic module (CEM)
Hva du kan gjøre
- 1Do not remedy this code directly. It is a follow-on fault, so troubleshoot and remedy the other fault codes in the engine control module and CEM first.
- 2If the code returns after a repair, have a workshop read out the CEM and check the CAN network with diagnostic equipment.
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.