VOLVO
ECM-U210748 - Collision Mitigation By Braking. System Internal Failures. Supervision software failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) gets signals from the forward sensing module (FSM) and applies braking help when a collision threatens, as part of the adaptive cruise control function. The code is set when adaptive cruise control requests come too frequently. Although the fault is named a supervision software failure, the code concerns how often the request is sent. It is set after the fault has been stored in the FSM or the central electronic module (CEM).
Mulige årsaker
- The fault is in the forward sensing module (FSM)
- The fault is in the central electronic module (CEM)
Hva du kan gjøre
- 1Read the fault codes in the FSM and CEM and remedy them first. This code can be erased only once the root fault is remedied and its fault code erased.
- 2Erase the fault codes once the root fault is remedied, then check on a test drive whether the code returns.
- 3If the code returns, have a workshop troubleshoot the FSM and CEM with diagnostic equipment, as this requires measurement.
Symptomer du kan merke1
- Warning symbol and message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.