Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-U210882
    VOLVO

    ECM-U210882 - Adaptive Cruise Control. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    9 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (33)
    • Volvo S60 (2011–)2011Alle motorer unntatt: B5254T5, D4162T, D5204T2, D5244T10
    • Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7, B6304T4
    • Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3, B6304T3, B6304T4, B6304T5
    • Volvo S80 (2007–)2007Kun motor: B6324S, B8444S
    • Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, B8444S
    • Volvo S80 (2007–)2010Kun motor: B4204T6, B6304T2, B6324S, B6324S2, B8444S
    • Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7, B6304T4, B6324S4, B6324S5, B8444S
    • Volvo S80 (2007–)2012Alle motorer unntatt: B5254T10, D4162T, D5204T3, D5244T11, D5244T15
    • Volvo S80 (2007–)2013–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7, B6304T4, B6324S4, B6324S5
    • Volvo S80 (2007–)2015Kun motor: B4164T, B6304T4, B6324S4, B6324S5
    • Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
    • Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
    • Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
    • Volvo V60 (2011–)2011Alle motorer unntatt: D4162T, D5204T2, D5244T10
    • Volvo V60 (2011–)2012Alle motorer unntatt: D4162T, D5204T3, D5244T11, D5244T15
    • Volvo V60 (2011–)2013–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7, B6304T4
    • Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3, B6304T3, B6304T4, B6304T5
    • Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
    • Volvo V70 (2008–)2010Kun motor: B4204T6, B6304T2, B6324S, B6324S2
    • Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7, B6304T4, B6324S5
    • Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7, B6304T4, B6324S5
    • Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2, B6304T4
    • Volvo XC60 (2009–)2009Kun motor: B6304T2
    • Volvo XC60 (2009–)2010Alle motorer unntatt: D5244T10, D5244T14, D5244T16
    • Volvo XC60 (2009–)2011Alle motorer unntatt: D5204T2, D5244T10, D5244T16
    • Volvo XC60 (2009–)2012Alle motorer unntatt: D5204T3, D5244T11, D5244T15, D5244T17
    • Volvo XC60 (2009–)2013–2015Kun motor: B4204T7, B6304T4, B6324S4, B6324S5
    • Volvo XC70 (2008–)2008Kun motor: B6324S
    • Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
    • Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
    • Volvo XC70 (2008–)2011–2015Kun motor: B6304T4, B6324S4, B6324S5
    • Volvo XC90 (2003–)2007–2010Kun motor: B6324S
    • Volvo XC90 (2003–)2011–2014Kun motor: B6324S5

    Hva betyr feilkoden?

    The engine control module (ECM) continuously receives signals from the central electronic module (CEM) over CAN that cover the steering wheel controls for adaptive cruise, and checks the communication. Although the fault is named a sequence counter problem, the code is set when communication with the CEM is lost. After the ECM has been reloaded or the battery has been disconnected, press the brake pedal down twice for about two seconds to activate cruise control.

    Mulige årsaker

    • Open circuit in the communication cable
    • Communication cable short-circuited to ground
    • Communication cable short-circuited to supply voltage
    • Contact resistance or oxidation in the connections
    • Open circuit in the connections
    • Short-circuit in the connections

    Hva du kan gjøre

    1. 1Read the fault codes in the engine control module. If any of ECM-U012088, ECM-U000188, ECM-U1A1400, ECM-U000108 or ECM-U000100 is stored, check it first.
    2. 2Read the fault codes in the CEM and remedy them first. Do not replace the CEM for a CAN fault unless troubleshooting shows an internal fault.
    3. 3Check that the connectors in the CAN network between the engine control module and the CEM are secure and clean, and look for chafed wiring.

    Symptomer du kan merke2

    • Cruise control does not work at all
    • Cruise control cannot be engaged

    Hva feilen kan påvirke1

    • Cruise control is turned off while the fault is active

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.