VOLVO
EPS-0081 - Speed. Faulty signal
System
Elektrisk servostyring (EPS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The EPS reads the speed signal that the BCM sends over the CAN network. The fault code is set when the power steering receives an incorrect speed signal from the BCM. The cause lies in the brake control module.
Mulige årsaker
- Fault in the brake control module (BCM), which sends the speed signal
Hva du kan gjøre
- 1Read the fault codes in the brake control module (BCM) first, since this code is stored in the power steering after the fault in the BCM
- 2Remedy the fault in the BCM according to its fault code, then clear this code
- 3The fault in the BCM can affect the braking system, so have a workshop check the BCM and the brakes
- 4If you have diagnostic equipment: compare the speed value in live data with the speedometer during a road test
Symptomer du kan merke2
- Abnormally light steering at high speed
- Abnormally heavy steering at low speed
Hva feilen kan påvirke1
- The power steering works with a built-in default speed value
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.