VOLVO
EPS-0082 - Engine status. Faulty signal
System
Elektrisk servostyring (EPS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The power steering receives information from the engine control module (ECM) over the CAN network that the engine is running. The fault code is set when the engine status signal or the engine speed signal from the engine control module is wrong or missing. The fault therefore lies in the engine control module, and the code is set there first.
Mulige årsaker
- Fault in the engine control module (ECM), which sends the engine status and speed
Hva du kan gjøre
- 1Read the fault codes in the engine control module (ECM) first and remedy them there
- 2Clear this fault code only after the fault in the engine control module has been remedied and cleared
- 3Road test the car and read the fault codes again to see whether this code returns
Symptomer du kan merke1
- No symptoms noticeable to the driver
Hva feilen kan påvirke1
- With the ignition on the pump motor starts, which gives power steering even when the engine is not running
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.