VOLVO
EPS-E003 - Configuration fault. Faulty configuration
System
Elektrisk servostyring (EPS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The control module compares its configuration with the one that the central electronic module (CEM) sends on the CAN network. The fault code is set when they do not match, or when communication with the CEM is interrupted. One possible cause is a control module meant for another car, such as a used module with different software or hardware.
Mulige årsaker
- Wrong CAN configuration ID: a used module from another car with different software or hardware
- Open circuit in the CAN wiring between the power steering module and the central electronic module (CEM)
Hva du kan gjøre
- 1Read the fault codes in the central electronic module (CEM) and remedy them first
- 2Has the module recently been replaced without new software being downloaded? If so, that may be the cause
- 3Programming and software download is a workshop task: have a workshop download the correct software to the module that set the fault code
- 4Check that the connectors in the CAN network between the power steering and the CEM are secure and free from oxidation
- 5Power steering affects how easily the car can be steered, so have a workshop fix the fault soon
- 6If the fault code returns after these checks, have a workshop replace the faulty control module
Symptomer du kan merke4
- Abnormally light steering at high speed
- Abnormally heavy steering at low speed
- General warning lamp is lit
- A message appears in the display
Hva feilen kan påvirke1
- The pump motor may run at a constant speed
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.