VOLVO
ICM-6C7B - Remote Digital Audio Receiver (RDAR) not valid Faulty signal
System
Infotainment (ICM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
6 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013), XC90 (2003–)
Hva betyr feilkoden?
ICM searches the CEM's register of approved units for the remote digital audio receiver (RDAR). If RDAR is not listed there, the receiver is blocked and digital radio stops working. The code is set when the gap is found, usually after a change in which the new receiver was not given its software.
Mulige årsaker
- Replacing the digital radio receiver with a unit the CEM register does not approve
- Software not downloaded when the digital radio receiver was replaced
- The software download failed or was incomplete
Hva du kan gjøre
- 1Read the fault code, clear it and test-drive the car to see whether it returns
- 2If the digital radio receiver has been replaced, check that software was downloaded. This is done by a workshop
- 3Check that the connectors to the digital radio receiver are fully seated and free from oxidation
- 4If the fault remains after the software download, the receiver may need replacing. A workshop should do this
Symptomer du kan merke1
- Digital radio does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.