VOLVO
ICM-B100F8F - Video Input "B". Bus Signal / Message Failures. Erratic
System
Infotainment (ICM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
ICM talks to the parking camera (PAC) over composite video on video input B. The code is set when ICM detects a faulty video signal, and the fault appears irregularly. The camera picture can therefore be unstable even when it does not disappear altogether.
Mulige årsaker
- Sync signal from the CVBS video input reaches the control module incorrectly
- Loose connection on the composite video cable (CVBS) where it meets the control module
- Damaged wire running from the control module to the CVBS video input
Hva du kan gjøre
- 1Check that the fuses are intact. Their positions are in the owner's manual or on the fuse box cover
- 2Test the camera view with the buttons, controls or a drive, and note when the picture gets worse
- 3Check that the connectors at video input B and at the parking camera are seated firmly and not oxidised. Move them gently while watching the picture
- 4Inspect the video wire for chafing and breaks where it passes edges or moving parts. With a diagnostic tool, run the quick test and check whether the code returns
Symptomer du kan merke3
- Other video problems
- Poor image quality or no picture on the front screen
- Rear entertainment does not work, works partly or works incorrectly
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.