VOLVO
IEM-B200998 - Insulated Gate Bipolar Transistor. Component Failures. Component or system over temperature
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The code concerns over-temperature in the electric rear axle drive control module (IEM). The temperature sensors inside the control unit measure the high voltage transistors, and the code is set when one or more of the sensors shows a high temperature with the ignition on. It may be that the control module becomes too hot inside, or an internal fault in the voltage converter (ISC). Electric propulsion is then not possible.
Mulige årsaker
- Too high an internal temperature in the control module
- Internal fault in the voltage converter (ISC)
Hva du kan gjøre
- 1If you have a diagnostic tool: read the IEM temperature values in live data and see whether any sensor shows clearly more heat than the others
- 2Have a workshop check the electric rear axle drive control module and the voltage converter (ISC). High voltage systems may only be handled by qualified personnel
- 3Do not carry out any work on the control module yourself
- 4After the repair, check that the code is not stored again
Symptomer du kan merke4
- Warning symbol and text message appear
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Hva feilen kan påvirke2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.