VOLVO
IEM-B201213 - Phase Current Sensors. General Electrical Failures. Circuit open
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The phase current sensor in the voltage converter (ISC) gives a signal that is missing or incorrect. The code indicates an open circuit. The cause lies in the ISC, and electric propulsion is then not possible.
Mulige årsaker
- Internal fault in the voltage converter (ISC)
Hva du kan gjøre
- 1Have a workshop check the phase current sensor and its connectors in the voltage converter (ISC). High voltage systems may only be handled by qualified personnel
- 2If you have a diagnostic tool: compare the phase currents with each other in live data while the car is in drive mode
- 3Do not carry out any work on the high voltage system yourself
- 4After the repair, check that the code is not stored again
Symptomer du kan merke4
- Text window and warning symbol with a text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Hva feilen kan påvirke2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.