VOLVO
IEM-P117144 - Rotor Sensor. System Internal Failures. Data memory failure
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
An internal memory fault has occurred in the electric rear axle drive control module (IEM). The fault is set with the ignition on once the control module's test has started. Although the code is named rotor sensor, it concerns the memory in the IEM. The cause lies in the voltage converter (ISC). Electric propulsion is then not possible.
Mulige årsaker
- Internal fault in the voltage converter (ISC)
Hva du kan gjøre
- 1Have a workshop read the fault codes in the IEM and check the voltage converter (ISC). High voltage systems may only be handled by qualified personnel
- 2Do not carry out any work on the high voltage system yourself
- 3If you have a diagnostic tool: read the fault codes with the ignition on and see whether the code is still there
- 4After the repair, check that the code is not stored again
Symptomer du kan merke4
- Text window and warning symbol with a text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Hva feilen kan påvirke2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.