VOLVO
IEM-P181E96 - Clutch Actuator Range/Performance. Component Failures. Component internal failure
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
Although the code is named component internal failure, it applies when the clutch control for the electric rear axle (DCC) has detected critical faults, or when its temperature is too high. The causes are poor cooling of the electric rear axle, a damaged DCC, or an internal fault in the electric rear axle. Electric propulsion is then not possible.
Mulige årsaker
- Poor cooling of the electric rear axle (ERAD)
- The clutch control for the electric rear axle (DCC) is damaged
- Internal fault in the electric rear axle (ERAD)
Hva du kan gjøre
- 1Check the coolant level and look for leaks, since poor cooling of the electric rear axle is one of the causes
- 2Have a workshop check the clutch control for the electric rear axle (DCC) and the rear axle itself. High voltage systems may only be handled by qualified personnel
- 3Do not carry out any work on the high voltage system yourself
- 4After the repair, check that the code is not stored again and that electric propulsion works
Symptomer du kan merke4
- Text window and warning symbol with a text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Hva feilen kan påvirke2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.