VOLVO
IEM-P218185 - Cooling System Performance. Bus Signal / Message Failures. Signal above allowable range
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
Although the code is named cooling system, it applies when the cooling system signal from the engine control module (ECM) is too high. It is set with the ignition on once the test has started. The causes are a damaged coolant pump, a damaged coolant temperature sensor, or a software fault in the ECM or in the electric rear axle drive control module (IEM). Electric propulsion is then not possible.
Mulige årsaker
- Damaged coolant pump
- Damaged coolant temperature sensor
- Software fault in the engine control module (ECM)
- Software fault in the electric rear axle drive control module (IEM)
Hva du kan gjøre
- 1Check the coolant level and look for leaks in the cooling system
- 2Have a workshop read the fault codes in the engine control module (ECM) and check the coolant pump and the temperature sensor. High voltage systems may only be handled by qualified personnel
- 3Have a workshop download new software to the ECM and to the IEM if needed. Do not carry out any work on the high voltage system yourself
- 4After the repair, read out the fault codes with the ignition on and check that the code is not stored again
Symptomer du kan merke4
- Text window and warning symbol with a text message
- Drive mode PURE disengages automatically or is unavailable
- Drive mode AWD disengages automatically or is unavailable
- Drive mode HYBRID: the combustion engine runs all the time or too often
Hva feilen kan påvirke2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.