Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    IEM-U000155
    VOLVO

    IEM-U000155 - High Speed CAN Communication Bus. System Programming Failures. Not configured

    System

    Ukjent system / Merkespesifikk

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    1 modell

    V60 (2011–)

    Vis modeller per årsmodell og motor (2)
    • Volvo V60 (2011–)2013–2014Kun motor: D82PHEV
    • Volvo V60 (2011–)2015Kun motor: D82PHEV, D87PHEV

    Hva betyr feilkoden?

    The control modules on the CAN network communicate with a standardized method. Here the signal configuration IDs for the HS-CAN (the high speed CAN network) do not match, or something is disturbing the network. The causes are a control module that is not intended for this car, for example a used one with different software or hardware, or a software fault in the IEM or in the airbag control module (SRS). The control module stays switched off until the power supply has been broken and reconnected.

    Mulige årsaker

    • Incorrect configuration ID, for example a used control module that is not intended for this car
    • Software fault in the electric rear axle drive control module (IEM)
    • Software fault in the airbag control module (SRS)

    Hva du kan gjøre

    1. 1Has a control module recently been replaced with a used one? Have a workshop check that it is intended for this car and that the right software is loaded
    2. 2Have a workshop download the latest software to the IEM and check the SRS control module. High voltage systems may only be handled by qualified personnel
    3. 3Do not work on the airbag system yourself. Have a workshop check it if the fault remains
    4. 4After the repair, read out the fault codes with the ignition on and check that the code is not stored again

    Symptomer du kan merke4

    • Text window and warning symbol with a text message
    • Drive mode PURE disengages automatically or is unavailable
    • Drive mode AWD disengages automatically or is unavailable
    • Drive mode HYBRID: the combustion engine runs all the time or too often

    Hva feilen kan påvirke3

    • The control module shuts itself off (bus-off)
    • Electric propulsion is not possible
    • Brake energy regeneration from the electric rear axle is not possible

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.