VOLVO
IEM-U041268 - Invalid Data Received From Battery Energy Control Module (BECM). Algorithm Based Failures. Event information
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The electric rear axle drive module (IEM) is not getting at least one signal from BECM, the battery energy control module. The fault is only checked once the test has started at ignition on, and the code is stored when the conditions are met.
Mulige årsaker
- Oxidation, contact resistance or loose contacts at the terminals to Sensor CAN
- Damaged cables on Sensor CAN
- Software error in the electric rear axle drive module (IEM)
- Software fault in the BECM (battery energy control module)
- Internal fault inside the ISC voltage converter
Hva du kan gjøre
- 1Read out and note the code, clear it and road test to see whether it returns
- 2Have a workshop check that the connectors to Sensor CAN are fully engaged and free from corrosion
- 3Have a workshop check chafed or damaged CAN cables
- 4Have a workshop with diagnostic equipment check communication with the battery energy control module and load the latest software to the control modules if needed
- 5Do not work on the electric rear axle or the battery high voltage system yourself; have a workshop carry out those checks
Symptomer du kan merke4
- Warning symbol and text message in the display
- PURE drive mode disengages by itself or is not available
- AWD drive mode disengages by itself or is not available
- HYBRID drive mode runs with the combustion engine active all the time or too often
Hva feilen kan påvirke2
- Electric propulsion is not possible
- Brake energy recovery from the electric rear axle ERAD is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.