VOLVO
IEM-U1A4B63 - Control Module Processor B. Algorithm Based Failures. Circuit / component protection time-out
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The electric rear axle drive module (IEM) monitors its internal components. The code is stored when the microprocessor has an internal fault. The fault is only checked once the vehicle is in driving position, meaning the car has been cranked and either the electric or the combustion engine has started.
Mulige årsaker
- Software error in the electric rear axle drive module (IEM)
- Internal fault inside the ISC voltage converter
Hva du kan gjøre
- 1Read out, clear the code, start the car and road test to see whether it returns
- 2Have a workshop check whether new software is available for the control module and install it if needed
- 3If the code returns after the software update, have a workshop check the electric rear axle and the voltage conversion unit ISC
- 4Do not work on the electric rear axle or its high voltage system yourself; have a workshop carry out those checks
Symptomer du kan merke4
- Warning symbol and text message in the display
- PURE drive mode disengages by itself or is not available
- AWD drive mode disengages by itself or is not available
- HYBRID drive mode runs with the combustion engine active all the time or too often
Hva feilen kan påvirke2
- Electric propulsion is not possible
- Brake energy recovery from the electric rear axle ERAD is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.