VOLVO
IEM-U300083 - Control Module. Bus Signal / Message Failures. Value of signal protection calculation incorrect
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The electric rear axle drive module (IEM) is expected to respond quickly to the engine control module's (ECM) request to reduce torque. Although the code is named checksum, it relates to the control module reacting too slowly to that request. The fault is only checked once the car is driven in gear D or R.
Mulige årsaker
- Software error in the electric rear axle drive module (IEM)
- Internal fault inside the ISC voltage converter
Hva du kan gjøre
- 1Read out, clear the code and road test in D or R to see whether it returns
- 2Have a workshop with diagnostic equipment check whether new software is available for the control module and download it if needed
- 3Do not work on the electric rear axle or its high voltage system yourself; have a workshop carry out those checks
Symptomer du kan merke4
- Warning symbol and text message in the display
- PURE drive mode disengages by itself or is not available
- AWD drive mode disengages by itself or is not available
- HYBRID drive mode runs with the combustion engine active all the time or too often
Hva feilen kan påvirke2
- Electric propulsion is not possible
- Brake energy regeneration from the electric rear axle ERAD is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.