VOLVO
IGM-B201248 - Phase Current Sensors. System Internal Failures. Supervision software failure
System
Ukjent system / Merkespesifikk
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
Although the name points to the supervision software, the code applies when the phase current sensor readings disagree too much with one another. The high voltage generator control module (IGM) keeps an eye on the voltage and current feed to the starter generator ISG. The fault is only checked once the combustion engine is running.
Mulige årsaker
- Oxidation, contact resistance or loose contacts at the connections between the ISG and the ISC
- A short circuit from the high voltage cable to ground
- Break in the high voltage cable
- Wiring between the ISG and the ISC is damaged
- Internal fault inside the ISG starter generator
- Internal fault inside the ISC voltage converter
Hva du kan gjøre
- 1Read out, clear the code and road test with the engine running to see whether it returns
- 2Have a workshop check the cabling and connections between the ISG and the ISC
- 3If the cabling is in good condition, have a workshop check the starter generator ISG and the ISC voltage converter
- 4The high voltage system may only be handled by a workshop; do not work on it yourself
Symptomer du kan merke5
- Warning symbol and text message in the display
- Warning about power supply problems from the alternator and charge regulator
- Charging of the high voltage battery while driving is absent, reduced or not working correctly
- High voltage battery is discharged or charges poorly
- HYBRID drive mode: the combustion engine is active all the time or too often
Hva feilen kan påvirke1
- The high voltage battery cannot be charged by the combustion engine
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.