Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    IGM-U040168
    VOLVO

    IGM-U040168 - Invalid Data Received From Engine control module. Algorithm Based Failures. Event information

    System

    Ukjent system / Merkespesifikk

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    1 modell

    V60 (2011–)

    Vis modeller per årsmodell og motor (2)
    • Volvo V60 (2011–)2013–2014Kun motor: D82PHEV
    • Volvo V60 (2011–)2015Kun motor: D82PHEV, D87PHEV

    Hva betyr feilkoden?

    The high voltage generator control module (IGM) lacks at least one signal from the engine control module (ECM), and the fault concerns communication on both HS CAN and sensor CAN. Although the code is named invalid data, it is the signals that are missing. The fault is only checked once the test has started at ignition on.

    Mulige årsaker

    • Oxidation, contact resistance or loose contacts at the terminals to HS CAN or sensor CAN
    • Damaged cables on HS CAN
    • Damaged cables on sensor CAN
    • Software fault in the IGM
    • Software fault in the engine control module (ECM)
    • Internal fault inside the ISC voltage converter

    Hva du kan gjøre

    1. 1Read out, clear the code and road test to see whether it returns
    2. 2Have a workshop check that the connectors on HS CAN and sensor CAN are fully engaged and free from corrosion
    3. 3Have a workshop check the cables on HS CAN and sensor CAN
    4. 4If a control module has been replaced without new software being loaded, that may be the cause; have a workshop check this
    5. 5Do not replace the central electronic module (CEM) for a CAN fault unless a workshop has found an internal fault in it
    6. 6The high voltage system may only be handled by a workshop; do not work on it yourself

    Symptomer du kan merke5

    • Warning symbol and text message in the display
    • Warning about power supply problems from the alternator and charge regulator
    • Charging of the high voltage battery while driving is absent, reduced or not working correctly
    • High voltage battery is discharged or charges poorly
    • HYBRID drive mode: the combustion engine is active all the time or too often

    Hva feilen kan påvirke1

    • The high voltage battery cannot be charged by the combustion engine

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.