VOLVO
KVM-B10CF24 - Right rear Latch clutch switch. General Signal Failures. Signal stuck high
System
Nøkkelfritt system (KVM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The switch for the right rear lock cylinder has been activated for too long, meaning its signal has stayed high. The code is stored when the time gets too long, and it points to the switch, the handle or the wiring. The driver usually does not notice the code.
Mulige årsaker
- Damaged switch
- The right rear handle has been held pulled out for an unusually long time
- The signal wire has a short to ground
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the handle returns to its rest position and is not damaged or held by dirt or ice
- 3With the ignition off, use a multimeter to check that the wire to the switch is not connected to ground (the body)
- 4With a diagnostic tool, read the switch value in live data while you use the lock cylinder, and check it changes
- 5Have a workshop replace the switch if it is damaged and the wire is sound
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.