VOLVO
KVM-E003 - Incorrect configuration. Faulty configuration
System
Nøkkelfritt system (KVM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Hva betyr feilkoden?
The control module checks its configuration ID against the signal that the central electronic module (CEM) transmits on the CAN network. If the IDs do not match, or if communication with the CEM is interrupted, the code is set. The control module then answers diagnostic commands, but normal CAN communication does not work.
Mulige årsaker
- Wrong CAN configuration ID, which happens when a module is meant for another car, for example a used one with different software or hardware
- Break in the CAN cabling that links the module to the central electronic module (CEM)
Hva du kan gjøre
- 1Read the codes, clear them and road test the car to see whether the code comes back
- 2Has a used control module been fitted to the car recently? It may then be wrong for this particular car, and that is a possible cause of the code
- 3Inspect the harness running from the module to the CEM for damage, chafing and breaks
- 4If codes are also stored in the central electronic module or in other control modules, start there, since the faults behind this code must be found with the other codes first
- 5Have a workshop read in the correct configuration number and install the newest software in the module
Symptomer du kan merke2
- No, or reduced, keyless function
- The remote control cannot be used
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.