Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    KVM-U014000
    VOLVO

    KVM-U014000 - Lost communication with Central Electronic Module (CEM). General Failure Information. No sub type information

    System

    Nøkkelfritt system (KVM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)

    Vis modeller per årsmodell og motor (5)
    • Volvo S60 (2011–)2011–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015

    Hva betyr feilkoden?

    The keyless vehicle module (KVM) receives the information it needs from the central electronic module (CEM) continuously over CAN communication. When the signal from the CEM stops and communication between them is interrupted, the code is set. The fault may lie in the CAN network, in the sending module, or in a module having been replaced without new software being loaded.

    Mulige årsaker

    • The CEM is no longer transmitting the signal that the keyless module expects
    • Open circuit in one or both CAN wires in part of the network
    • Short circuit between the CAN wires
    • Short circuit between one of the CAN wires and ground or supply voltage
    • Incorrect signal configuration in the control module that set the code, for example after a control module was replaced without new software being loaded

    Hva du kan gjøre

    1. 1Read the codes in all control modules; if several show communication faults, start troubleshooting in the central electronic module (CEM)
    2. 2Check the wiring in the CAN network for damage, chafing and loose or corroded connectors
    3. 3Clear the code and road test the car to see whether it comes back
    4. 4If the code is only stored in the control module that set it, have a workshop download and program the latest software
    5. 5Have a workshop measure the resistance in MS-CAN with the central electronic module disconnected to find where the open circuits or short circuits are
    6. 6Do not replace the central electronic module (CEM) because of a CAN fault unless troubleshooting shows it has an internal fault

    Symptomer du kan merke1

    • Locking, unlocking and central locking do not work

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.