VOLVO
OBC-P0D2A00 - Battery Charger Input Current Too High. General Failure Information. No sub type information
System
Innebygd lader (OBC)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The charging module in the car (OBC) has detected that the current from an external charging cable is too high. The charge current is picked on the control box fitted to the charging cable, and the cable sends a signal that depends on that choice. Charging the high voltage battery is not possible while the fault remains.
Mulige årsaker
- Incorrect connection to the power source
- The charging cable is damaged
- The charging socket in the car is damaged
Hva du kan gjøre
- 1Read out and erase the fault code, then charge again and see whether it comes back
- 2Check that the charging cable is not damaged, for example chafing, kinks or burnt connectors
- 3Check that the correct type of charging cable is used for the car
- 4Have a workshop check that the charging socket in the car is clean and undamaged and that the cable is fully seated in it
- 5Check that the mains socket works and that the charging cable is correctly connected to the power source
- 6The high voltage system may only be handled by authorised personnel. Do not work on it yourself; have a workshop check the charging if the fault remains
Symptomer du kan merke3
- Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
- The LED on the charging cable or the charging socket shows a fault
- It may be unclear when the fault appears; it may be present at all times
Hva feilen kan påvirke1
- Charging the high voltage battery is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.