VOLVO
OBC-P0D5662 - Proximity Detection Circuit. Algorithm Based Failures. Signal compare failure
System
Innebygd lader (OBC)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The charging control module (OBC) has found a comparison fault in the circuit that senses the charging cable. The pilot signal from the charging cable is active, but the resistance signal that shows which current has been selected is missing. Charging is not possible while the fault remains.
Mulige årsaker
- The charging socket in the car is damaged
- The charging cable is damaged
- Poor contact between the charging socket and the control module OBC
Hva du kan gjøre
- 1Read out and erase the fault code, charge again and see whether it comes back
- 2Check that the charging cable is not damaged and that the correct type of charging cable is used
- 3Have a workshop check that the charging socket in the car is clean and undamaged and that the cable is fully seated in it
- 4Have a workshop check the wiring to the control module OBC. Do not work on the high voltage system yourself
Symptomer du kan merke3
- Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
- The LED on the charging cable or the charging socket shows a fault and charging is reduced
- A text message and a warning symbol are shown in the display
Hva feilen kan påvirke1
- Charging the high voltage battery is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.