VOLVO
OBC-P0D9038 - Battery Charger Input Frequency Incorrect. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures. Signal frequency incorrect
System
Innebygd lader (OBC)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The frequency of the pilot signal between the charging cable and the control module OBC is wrong. The fault can be set when the cable is plugged in and its switch is turned on. A defective charging cable or a damaged charging socket can cause it. Charging is not possible while the fault remains.
Mulige årsaker
- The charging cable is defective
- The charging socket is defective
Hva du kan gjøre
- 1Read out and erase the fault code, charge again and see whether it comes back
- 2Check that the switch on the charging cable is on when you connect it
- 3Check that the charging cable is not damaged, for example chafing, kinks or burnt connectors
- 4Have a workshop check that the charging socket in the car is clean and undamaged and that the cable is fully seated in it
- 5The high voltage system may only be handled by authorised personnel. Do not work on it yourself; have a workshop check the charging if the fault remains
Symptomer du kan merke3
- A text message and a warning symbol are shown in the display
- Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
- The LED on the charging cable or the charging socket shows a fault
Hva feilen kan påvirke1
- Charging the high voltage battery is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.