Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    OBC-U1A0087
    VOLVO

    OBC-U1A0087 - Private Communication Network. Bus Signal / Message Failures. Missing message

    System

    Innebygd lader (OBC)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    1 modell

    V60 (2011–)

    Vis modeller per årsmodell og motor (2)
    • Volvo V60 (2011–)2013–2014Kun motor: D82PHEV
    • Volvo V60 (2011–)2015Kun motor: D82PHEV, D87PHEV

    Hva betyr feilkoden?

    The high voltage battery charger consists of the battery charger control module (OBC) and an OBC Gateway, which talk to each other over an internal sensor CAN. The fault is set when communication between the control module and the charger is missing, while the cable is plugged in and its switch is turned on. Charging the high voltage battery is not possible while the fault remains.

    Mulige årsaker

    • Open circuit in the CAN cables between the battery charger control module (OBC) and the OBC Gateway
    • Short circuit in the CAN cables between the battery charger control module (OBC) and the OBC Gateway
    • Contact resistance, oxidation or poor contact in the connections
    • The charging cable is damaged or faulty
    • A charging socket fuse is blown, or the socket or its connector is damaged
    • The cable harness between the charging socket and the battery charger control module (OBC) is damaged, or OBC is damaged

    Hva du kan gjøre

    1. 1Read out and erase the fault code, charge again and see whether it comes back
    2. 2Check that the charging cable is not damaged and, if possible, try another charging cable that is approved for the car
    3. 3Have a workshop check that the fuse for the charging socket is intact. It sits in the fuse box at the socket
    4. 4Have a workshop check that the charging socket and its connector are not damaged and that the connectors sit firmly without play
    5. 5Have a workshop check the CAN wires and the harness to the socket. Replace the module only if needed. Do not work on the high voltage system yourself

    Symptomer du kan merke2

    • Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
    • The LED on the charging cable or the charging socket shows a fault and charging is reduced

    Hva feilen kan påvirke1

    • Charging the high voltage battery is not possible

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.