VOLVO
OBC-U201166 - Motor. Algorithm Based Failures. Signal has too many transitions / events
System
Innebygd lader (OBC)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The battery charger control module (OBC) checks that the cable can be latched to the car by the lock motor inside the charging socket. The fault is set after OBC has repeatedly tried, one attempt after another, to latch the charging cable. The fault can come from an object blocking the charging socket or from a defective charging socket, and then charging the high voltage battery is not possible.
Mulige årsaker
- An object is blocking the charging socket
- The charging socket is defective
Hva du kan gjøre
- 1Look carefully into the charging socket for objects blocking it, and remove them if you can clearly see them
- 2Check that the charging socket is not damaged and that the charging cable can be locked into it
- 3Charge again once the charging socket is clean and undamaged, and see whether the fault comes back
- 4Have a workshop check the charging socket and the lock motor. The high voltage system may only be handled by authorised personnel, so do not work on it yourself
Symptomer du kan merke2
- Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
- The LED on the charging cable or the charging socket shows a fault and charging is reduced
Hva feilen kan påvirke1
- Charging the high voltage battery is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.