VOLVO
OBC-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
Innebygd lader (OBC)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The battery charger control module (OBC) normally receives information from the engine control module (ECM) over the CAN network, and compares the vehicle configuration with the one from the central electronic module (CEM). The fault is set when the vehicle configuration from CEM is missing. The code can appear with a software update, and then it does not need to be fixed. Charging the high voltage battery is not possible while the fault remains.
Mulige årsaker
- The fault code can be stored during a software update
- No vehicle configuration arrives from the central electronic module (CEM)
Hva du kan gjøre
- 1Has the car recently had a software update? If so, the fault code should be erased without further troubleshooting
- 2Read out and erase the fault code, then drive and see whether it comes back
- 3If the fault code comes back, have a workshop check the vehicle configuration and the central electronic module (CEM). The high voltage system may only be handled by authorised personnel
Symptomer du kan merke3
- Charging the high voltage battery from an external charging cable does not happen, is reduced or does not work correctly
- The LED on the charging cable or the charging socket shows a fault and charging is reduced
- A text message and a warning symbol are shown in the display
Hva feilen kan påvirke1
- Charging the high voltage battery is not possible
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.