VOLVO
PAC-B100E87 - Video Input "A". Bus Signal / Message Failures. Missing message
System
Drivlinje (Motor og girkasse)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The parking assistance camera module (PAC) passes the picture from the camera on to the control module for the front display. The fault is set when the video signal from the camera is missing. The fault can come from a loose connection, a damaged wire, the camera receiving no power or a damaged camera.
Mulige årsaker
- Poor contact where the video cable attaches to the camera or control module
- Damaged wire between the control module and the camera
- The camera receives no power
- Damaged wire
- Damaged camera
Hva du kan gjøre
- 1Check that the fuses are intact and that the connectors at the camera and the control module are firmly seated and not oxidised
- 2Check that the wire between the control module and the camera is not damaged
- 3Read out and erase the fault code, test drive with reverse gear engaged and see whether it comes back
- 4Have a workshop check that the camera receives power, and replace it if it is damaged
Symptomer du kan merke1
- Front and rear park assist does not work
Hva feilen kan påvirke1
- The control module for the front display (HLDF) shows a single-colour picture
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.