VOLVO
PAC-U012600 - Lost Communication With Steering Angle Sensor Module. General Failure Information. No sub type information
System
Drivlinje (Motor og girkasse)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The parking assistance camera module (PAC) normally gets its data from SAS, the steering wheel angle sensor, over CAN. The fault is set when communication with the SAS is missing. The fault should be traced in the control module that sends the information, and park assist does not work while the fault remains.
Mulige årsaker
- The cause may lie in the transmitting control module, the steering wheel angle sensor module (SAS)
Hva du kan gjøre
- 1Check that the connectors in the steering electronics are firmly seated and not oxidised, and that the fuses are intact
- 2Erase the fault code and test drive the car to see whether it comes back
- 3Have a workshop check the power supply, earth and CAN wires to the steering wheel module (SWM). Steering is safety-critical, so do not work on the sensor yourself
Symptomer du kan merke1
- Front and rear park assist does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.