VOLVO
PAC-U012687 - Lost Communication With Steering Angle Sensor Module. Bus Signal / Message Failures. Missing message
System
Drivlinje (Motor og girkasse)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The parking assistance camera module (PAC) talks to the steering wheel angle sensor (SAS) non-stop. The fault is set when communication with the SAS is disturbed or missing. The fault can come from a missing or broken voltage supply or earth to the SAS, contact resistance, broken or short-circuited CAN wires, or a SAS that does not suit the car, for example a used control module with different software.
Mulige årsaker
- No power reaches the steering wheel angle sensor module (SAS)
- Open circuit in the ground wire to the steering wheel angle sensor module (SAS)
- Contact resistance in the connections
- Open circuit or short circuit in the CAN wires
- The steering wheel angle sensor module (SAS) does not match this car, such as a second-hand unit with other software or hardware
Hva du kan gjøre
- 1Check that the fuses are intact and that the earth points are firmly fixed and not oxidised
- 2Erase the fault code and test drive the car to see whether it comes back
- 3Has the steering wheel angle sensor or the steering wheel module been replaced recently? Tell the workshop, since it then needs the right software
- 4Have a workshop check the power supply, the earth and the CAN wires to the steering wheel angle sensor. Steering is safety-critical, so do not work on it yourself
Symptomer du kan merke1
- The parking camera does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.