VOLVO
PAC-U200D12 - Control Module Output Power A. General Electrical Failures. Circuit short to battery
System
Drivlinje (Motor og girkasse)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The parking assistance camera module (PAC) supplies power to a connected camera. The fault is set when the wire to the camera is broken or touches supply voltage. It can come from a loose connection at the video cable joint, a damaged wire, a damaged camera or a damaged PAC. Park assist does not work while the fault remains.
Mulige årsaker
- Poor contact where the video cable attaches to the camera or control module
- Damaged cable between the control module and the camera
- Damaged camera
- Damaged control module
Hva du kan gjøre
- 1Check that the fuses are intact and that the connectors at the video cable joints are firmly seated and not oxidised
- 2Check that the cable to the camera is not damaged, for example chafed or pinched
- 3Erase the fault code and test drive in a gear other than reverse to see whether it comes back
- 4Have a workshop measure the cable to the camera for open circuits and short circuits to voltage, and replace the camera or the parking assistance camera module (PAC) if damaged
Symptomer du kan merke1
- Front and rear park assist does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.