VOLVO
PAC-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
System
Drivlinje (Motor og girkasse)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The parking assistance camera module (PAC) should be told the car's current setup by the central electronic module (CEM). The fault is set when the configuration file from the CEM does not arrive in time. It is caused by the communication with the CEM being interrupted, and the parking camera does not work while the fault remains.
Mulige årsaker
- Communication with the central electronic module (CEM) is interrupted
Hva du kan gjøre
- 1Erase the fault code and test drive the car. If it comes back, the communication with the CEM is probably still interrupted
- 2Check that the connectors on the CAN wires are firmly seated and not oxidised
- 3Have a workshop trace the fault in the CAN network between the parking camera and the central electronic module (CEM)
Symptomer du kan merke1
- The parking camera does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.