VOLVO
PAC-U300083 - Control Module. Bus Signal / Message Failures. Value of signal protection calculation incorrect
System
Drivlinje (Motor og girkasse)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The signals that the parking assistance camera module (PAC) receives over the CAN network do not check out, according to the checksum that protects the signal. The fault is set when the received signals are incorrect, and the cause is an internal fault in the control module. The picture on the front display may then be wrong or missing.
Mulige årsaker
- Internal fault in the control module
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Erase the fault code and test drive with reverse gear engaged to see whether it comes back
- 3The fault is in the control module itself, so you cannot fix it. Have a workshop check the parking camera and replace it if needed
Symptomer du kan merke1
- Front and rear park assist does not work
Hva feilen kan påvirke3
- The control module for the front display (HLDF) shows a single-colour picture
- The control module for the front display (HLDF) shows no picture
- The guide lines that show the car's position sideways are drawn completely straight, whatever the steering wheel angle
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.