VOLVO
PAC-U30008F - Control Module. Bus Signal / Message Failures. Erratic
System
Drivlinje (Motor og girkasse)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The parking assistance camera module (PAC) receives signals over the CAN network that are not correct. The fault is set when the signals are wrong, and the cause is an internal fault in the control module. The fault shows on the front display, where the picture can be single-colour or missing, or where the guide lines do not follow the steering wheel.
Mulige årsaker
- Internal fault in the control module
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Erase the fault code and test drive the car to see whether it comes back
- 3Have a workshop check the parking camera. The internal fault cannot be fixed by you
Symptomer du kan merke1
- Front and rear park assist does not work
Hva feilen kan påvirke3
- The control module for the front display (HLDF) shows a single-colour picture
- The control module for the front display (HLDF) shows no picture
- The guide lines that show the car's position sideways are drawn completely straight, whatever the steering wheel angle
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.