VOLVO
PAM-0008 - Parking sensor 4. Signal too high
System
Parkeringsassistent (PAM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Hva betyr feilkoden?
The parking assistance module (PAM) monitors the signal coming from parking sensor 4, which sits in the outer right rear part of the bumper. If the voltage on the signal wire is too high, the code is set and parking assistance from that sensor does not work.
Mulige årsaker
- Short circuit to supply voltage in the signal wire or in the connectors between the module and the sensor
- Short circuit to supply voltage in the sensor itself
- Open circuit in the ground wire or in the connectors between the module and the sensor
Hva du kan gjøre
- 1Check the sensor connector and the wiring behind the bumper for damage and moisture
- 2Check that the sensor is secure in the bumper and not damaged
- 3Check the signal wire for a short to supply voltage and the ground wire for an open circuit with diagnostic equipment
- 4Replace the parking sensor if the wiring is intact but the fault remains
Symptomer du kan merke2
- The information lamp is lit
- Message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.