VOLVO
PAM-U010000 - Lost Communication With Engine control module. General Failure Information. No sub type information
System
Parkeringsassistent (PAM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The parking assistance module no longer receives replies from the engine control module (ECM), although it communicates with it all the time. The fault lies in the control module that should send the signal, or in the wires and connectors between the control modules.
Mulige årsaker
- The fault lies in the control module that should send the signal (sending control module)
- A break or short-circuit in the CAN wires between the control modules
- Faulty software in the control module that stored the code, after a control module was replaced without new software being loaded
Hva du kan gjøre
- 1Read and clear the code, then test drive the car with the engine running to see whether it comes back
- 2Think about whether any control module has been replaced in the car without new software being loaded, and tell the workshop
- 3If you have a diagnostic tool, check whether codes are stored in the engine control module and in the central electronic module (CEM)
- 4Check that the connectors at the parking assistance module and the engine control module are firmly seated and free from oxidation
- 5Have a workshop check the CAN wires between the control modules and trace the control module that should send the signal
- 6If the code is stored only in the parking assistance module, have a workshop load the latest software into it
Symptomer du kan merke3
- Front or rear parking assistance does not work
- Yellow warning symbol and text message in the display
- Text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.